Kickdown Rods Galore & More

Superior Quality, Custom Made, 'Hard to Find' Ford Reproduction Parts

  • Shop
  • 1970 Ford Mustang/Cougar 351C OR W 4V C4 or FMX Transmission Kickdown Rod

1970 Ford Mustang/Cougar 351C OR W 4V C4 or FMX Transmission Kickdown Rod

from 85.00
70 MustangCougar 351C 4V FMX.jpg

1970 Ford Mustang/Cougar 351C OR W 4V C4 or FMX Transmission Kickdown Rod

from 85.00

This kickdown rod is made of stainless steel and will remain elegant looking its entire life. The bushings are permanently installed just like the OEM bushings were except the plastic is superior to the nylon used by the OEM. That plastic is Delrin which has better lubricity. 4V only...Please contact us BEFORE purchasing if you have an aftermarket high rise intake manifold installed or a carb spacer greater than 1/4". There is a $15 surcharge to make a custom rod for these applications.

NOTE: If you are using a Holley carburetor and do not have the kickdown rod return spring kit that is needed, go to this link to pick up the spring kit.

Part Customization (Do you need a custom made rod!):
Quantity:
Add To Cart

This kickdown rod is made of stainless steel and will remain elegant looking its entire life. The bushings are permanently installed just like the OEM bushings were except the plastic is superior to the nylon used by the OEM. That plastic is Delrin which has better lubricity. 4V only...Please contact us BEFORE purchasing if you have an aftermarket high rise intake manifold installed or a carb spacer greater than 1/4". There is a $15 surcharge to make a custom rod for these applications.

NOTE: If you are using a Holley carburetor and do not have the kickdown rod return spring kit that is needed, go to this link to pick up the spring kit.