Kickdown Rods Galore & More

Superior Quality, Custom Made, 'Hard to Find' Ford Reproduction Parts

  • Shop
  • FITECH Throttle/Kickdown Cable Bracket

FITECH Throttle/Kickdown Cable Bracket

75.00
Fitech EFI Throttle cable bracket3.JPG
Fitech EFI Throttle cable bracket.JPG
Fitech EFI Throttle cable bracket on car.JPG

FITECH Throttle/Kickdown Cable Bracket

75.00

This bracket is designed for a dual throttle cable/kickdown cable that has two, 5/16" (8mm) end connection holes. The bracket was designed to fit up Lokar cables or similar for both the throttle and the transmission kickdown. They are  made to accommodate a Fitech EFI unit mounted on a manifold whose rear bolt center distance is 5.125"+/-.125". It utilizes a drop center cross bar to clear the sensors that protrude out of the back of the EFI unit.  It's made from 14 ga steel and primed and painted with Eastwood's Black Zinc Phosphate coating.  

Quantity:
Add To Cart

This bracket is designed for a dual throttle cable/kickdown cable that has two, 5/16" (8mm) end connection holes. The bracket was designed to fit up Lokar cables or similar for both the throttle and the transmission kickdown. They are  made to accommodate a Fitech EFI unit mounted on a manifold whose rear bolt center distance is 5.125"+/-.125". It utilizes a drop center cross bar to clear the sensors that protrude out of the back of the EFI unit.  It's made from 14 ga steel and primed and painted with Eastwood's Black Zinc Phosphate coating.