1980-1986 F-Series P/U or Bronco with a 302 or 351W, C6, 4V Transmission Kickdown Rod

84 F100-F350 351W 4V C-6.JPG
truck kdr end detail.jpg
84 F100-F350 351W 4V C-6.JPG
truck kdr end detail.jpg

1980-1986 F-Series P/U or Bronco with a 302 or 351W, C6, 4V Transmission Kickdown Rod

from $88.00

This kickdown rod is made of stainless steel and will remain elegant looking its entire life. The bushings are permanently installed just like the OEM bushings were except the plastic is superior to the nylon used by the OEM. That plastic is Delrin which has better lubricity.

NOTE: YOUR CARBURETOR MUST HAVE A KICKDOWN LEVER INSTALLED IN ORDER TO BE ABLE TO USE THIS KICKDOWN ROD. EDELBROCK CARBS REQUIRE THEIR PART # 1483, FORD KICKDOWN ROD ADAPTER.

Select YES for a custom rod if you have an aftermarket high rise intake manifold installed or a carb spacer greater than 1".

If you need a custom rod, please NOTE what it is about your application that makes it custom so I will know how to build the rod.

NOTE: This rod will also fit a full size Ford Bronco in the '80-'86 year range with the 351W and C-6 transmission. NOT FOR USE WITH AN AOD TRANSMISSION.

NOTE: If you are using a Holley 4V carburetor and do not have the kickdown rod return spring kit that is needed, go to this link to pick up the spring kit.

Parts Customization (Do you want a custom made rod?):
Quantity:
Add To Cart