Kickdown Rods Galore & More

Superior Quality, Custom Made, 'Hard to Find' Ford Reproduction Parts

  • Shop
  • 1971-1973 Mustang 302 C4 2V Transmission Kickdown Rod

1971-1973 Mustang 302 C4 2V Transmission Kickdown Rod

from 90.00
71-73 Mustang 302 C-4.jpg

1971-1973 Mustang 302 C4 2V Transmission Kickdown Rod

from 90.00

This kickdown rod is made of stainless steel and will remain elegant looking its entire life. The bushings are permanently installed just like the OEM bushings were except the plastic is superior to the nylon used by the OEM. That plastic is Delrin which has better lubricity. 2V only. Please contact us BEFORE purchasing if you have a 4V aftermarket high rise intake manifold or a carb spacer greater than 1/4" is installed as there is a $15 surcharge to make a custom rod.

NOTE: If you are using a Holley carburetor and do not have the kickdown rod return spring kit that is needed, go to this link to pick up the spring kit.

Part Customization (Do you want a custom made rod!):
Quantity:
Add To Cart

This kickdown rod is made of stainless steel and will remain elegant looking its entire life. The bushings are permanently installed just like the OEM bushings were except the plastic is superior to the nylon used by the OEM. That plastic is Delrin which has better lubricity. 2V only. Please contact us BEFORE purchasing if you have a 4V aftermarket high rise intake manifold or a carb spacer greater than 1/4" is installed as there is a $15 surcharge to make a custom rod.

NOTE: If you are using a Holley carburetor and do not have the kickdown rod return spring kit that is needed, go to this link to pick up the spring kit.